Water mitigation guides
Categories and classes, equipment calculations, grains per pound, drying goals and how to document equipment days and removals. Short answers first, sources at the end.
Water Damage Categories 1, 2 and 3 Explained
What Category 1, 2 and 3 water mean under ANSI/IICRC S500, how a category can change over time and what it means for removals and documentation.
Classes of Water Damage (Class 1–4) Explained
How S500 classifies the evaporation load of a water loss – Class 1 to Class 4 – and why the class sets the dehumidification chart factor.
How Many Air Movers per Room? Air Mover Calculation
The S500 equipment guideline for air movers: one per wet room, one per 50–70 sq ft of wet floor, one per 100–150 sq ft of wet wall and ceiling above 2 ft, plus offsets – with a worked example.
Dehumidifier Calculation: LGR and Conventional Sizing
How to size refrigerant dehumidifiers for a water loss: affected cubic feet divided by the class chart factor gives pints per day; divide by the unit’s rating. Factors for LGR and conventional units.
Grains per Pound (GPP) Calculator and Table
What grains per pound (GPP) mean in structural drying, how GPP is calculated from temperature and relative humidity, a GPP table and how to read grain depression across a dehumidifier.
Drying Goal and Dry Standard: When Is It Dry?
How to set a drying goal per material using a dry standard from an unaffected area, how to record monitoring points and when equipment can be removed.
How to Justify Equipment Days on a Mitigation Job
Why air-mover and dehumidifier days are questioned and how a daily log of readings, goals and equipment counts documents each day of drying.
Flood Cuts and Removal Decisions in Water Mitigation
When porous materials are removed instead of dried: category of water, material type, readings over time and access to wall cavities – and how to document each removal.
Daily Moisture Log: What Technicians Should Record
A field checklist for the daily moisture and psychrometric log of a water mitigation job – the readings, equipment counts and photos that make a drying log complete.