Guide

Flood cuts and removal decisions

Short answer

Remove what cannot be restored: porous materials affected by contaminated water, materials that do not respond to drying, and materials that block drying of a cavity. Document each removal with the category, the readings and photos before and after.

Category drives most removals

With Category 2 water the standard directs removal of contaminated carpet cushion; with Category 3 water porous materials in contact with the water – such as carpet, cushion, drywall and insulation – are generally removed rather than cleaned. Confirm the exact guidance in your edition.

Flood cuts

A flood cut removes drywall a set height above the wet line (often 2 or 4 ft) to open the cavity. Record the wet line, the cut height and the length of wall (LF). The scope quantity is LF × height.

Category 1 removals

Clean-water removals need a reason too: a material that did not respond to drying (readings not improving), a vapor barrier that traps water, or a finish that delaminated. Photos and two or more days of readings make that clear.

Section numbers differ between editions of ANSI/IICRC S500, so this guide names the topic. Your copy of the current edition and your own professional judgment are the reference. This guide is general information, not legal advice. IICRC is a registered trademark of the Institute of Inspection, Cleaning and Restoration Certification. ANSI/IICRC S500 is the IICRC Standard for Professional Water Damage Restoration. Drypol is not affiliated with or endorsed by the IICRC; we cite the standard by topic and do not reproduce it.

Sources

Let us document it for every job

Drypol Unlimited: equipment calculation, drying log, justification and scope – $1,000 a month, unlimited, 3 test cases free.

Start 3 free cases See a sample package

Related

Start 3 free cases