Guide

Classes of water damage: Class 1 to 4

Short answer

The class estimates how much water the materials have absorbed and therefore how much must be evaporated. In the 2021 edition the classes are based on the share of wet, porous surface in the drying area; Class 4 covers deeply held or bound water in dense materials such as hardwood, plaster or concrete.

The four classes (2021 edition)

  • Class 1 – least water absorption: wet, porous materials make up a small share of the combined floor, wall and ceiling surface area (S500 2021 uses less than about 5 %).
  • Class 2 – significant absorption: roughly 5 % to 40 % of the surface area is wet porous material.
  • Class 3 – greatest absorption: more than about 40 %, often with wet ceilings or wall cavities.
  • Class 4 – deeply held or bound water in low-permeance materials that needs special drying methods or longer drying times.

Earlier editions described the classes by how far water had wicked up the walls. Confirm the definitions in the edition you work to.

Why the class matters

The class sets the chart factor used to size dehumidification and helps explain the drying time. A Class 3 loss needs far more water removal per cubic foot than a Class 1 loss of the same size.

Document it

Note the class per drying chamber, with photos of wet walls and ceilings and the moisture map that shows how far water has travelled.

Section numbers differ between editions of ANSI/IICRC S500, so this guide names the topic. Your copy of the current edition and your own professional judgment are the reference. This guide is general information, not legal advice. IICRC is a registered trademark of the Institute of Inspection, Cleaning and Restoration Certification. ANSI/IICRC S500 is the IICRC Standard for Professional Water Damage Restoration. Drypol is not affiliated with or endorsed by the IICRC; we cite the standard by topic and do not reproduce it.

Sources

Let us document it for every job

Drypol Unlimited: equipment calculation, drying log, justification and scope – $1,000 a month, unlimited, 3 test cases free.

Start 3 free cases See a sample package

Related

Start 3 free cases